1. Ceramic-metal V-shape half ball to resist scouring and abrasion.
2. V-shape ball body and seat to generate cutting force.
3. On-off parts eccentric design to guarantee self-compensation sealing.
4. Inlayed or coated with anti-corrosive and anti-scaling ceramic layers.

1. Bidy throttle and sealing parts are all made of structural ceramic.
2.Ceramic Throttle windows control the curve stability and flow parameters.
3. Reliable sealing and sealing degree can meet ANSI B16.104 VI requirements.

1. Structural ceramic sealing to resist abrasion
2.Plate is even-wearing and sealing -effective
3.Low pressure bidrectional sealing with blockae and ash accumulation

1.Adopt structural ceramic to resist abrasion ,corrosion with longer working life
2.Compact structure,good rigidity,small flow resistance
3.Parallel single gate with small driving torque
4.Inner chamber adops lined ceramic,also painted anti-wear layer ,anti-corrosive layer with the good performance of anti-scaling,anti-oil scale and dust scale
5.The pipe of slab gate valve with guiding flow pore can be cleaned by the sweeper

1. Structural ceramic sealing to resist abrasion and scouring.
2. Bottom and outlet of valve adopt structural ceramic to improve anti-scouring.
3. Dregs-delivering port to avoid ash accumulation with tightened closure.
4. Inner body with anti-corrosive, anti-abrasive coating.

1. Structural ceramic sealing to resist corrosion with longer working life.
2. Blow-sweep device to clean body and reduce medium accumulation.
3. Double-seated and Bidirectional sealing with pressure.

1. Structural ceramic sealing to resist abrasion and scratching
2. Bidrectional sealing with pressure
3. Inner body adopts anti-scaling coating to avoid acaling and absorption

1. Triple eccentric and elastomer metal lines ensure a tight fit around the disc, giving a bubble tight shut-off at minimum operating torque.
2. Hard seal enables the valve applicable in high temperature.
3. Double seals of the stem completely isolates stem and body from outside materials.